How do I change scale from meters to feet in AutoCAD?

Alternative 3: Use the SCALE command

1. At the command line, enter SCALE.
2. At the Select objects prompt, enter All.
3. Enter 0,0 for the base point.
4. When prompted for scale factor, enter the appropriate scale factor for the units to be converted, based on the following list:

How do you scale meters in AutoCAD?

Set the correct map units

1. Open the DWG file downloaded from Digimap in AutoCAD.
2. Type ‘units’ in to the command bar and press enter, the Drawing Units window appears:
3. Using the dropdown in the ‘Insertion Scale’ section select ‘Meters’ if not currently set.
4. Press the OK button to close the window.

What is the scale factor from meters to feet?

1 metre is equal to 3.2808399 feet, which is the conversion factor from meters to feet.

How do you scale freely in AutoCAD?

How to scale up in AutoCAD – Window select the object(s), type SCALE, and then specify a number larger than 1. Hit Enter. The size of the object(s) will SCALE UP by that scale factor.

How do you change from mm to meters in AutoCAD?

Click Format menu > Drawing Setup. In the Drawing Setup dialog box, click the Units tab. Change the Drawing Units from Millimeter to Meter and click OK.

How do you use the metric scale 1 100?

A scale of 1 to 100 is indicated on a drawing using the code 1:100. This can be interpreted as follows: 1 centimetre (0.01 metre) measured with a ruler on the plan would need to be multiplied by 100 to give the actual size of 1 metre.

How do you use a 1 500 scale?

So, to get to 1:500, simply divide the length (24m) by 500. Scale Calculation: 24/500 =? Answer: 0.048m or 4.8cm long at 1:500.

How do you convert meters to US survey feet?

Metric. The Mass State Plane coordinate system is metric but may be converted to U.S. survey feet by multiplying meters by the fraction 3937/1200 (not 3.28084). U.S. survey feet may be converted to meters by multiplying U.S. survey feet by the fraction 1200/3937 (not 0.3048).

What does the scale 1/100 convert to?

How do I use the stretch command in AutoCAD?

AutoCAD Stretch

1. Select Stretch icon from the ribbon panel, as shown below: Or.
2. Select the object. We have selected the object with the help of box selection, as shown below:
3. Press Enter.
4. Specify the base point or displacement value.
5. Specify second point or the displacement value.

How do you change from mm to cm in AutoCAD?

Press Ctrl + 1 to open Properties Palette. In the Properties Palette, find the Primary Units category. In that group, change the Decimal separator to m and change the Dim suffix to cm. Now you can see the dimension changed.