What does a sway bar link kit do?

Sway bar links are what connect the outer end of the sway bar to the suspension component. Because the sway bar itself is a torsional swing, the sway bar link smooths the motion transfer between the sway bar and the control arm. The sway bar link maintains the camber angle of the inner wheels to control motion.

What are sway bar links on Jeep?

The sway bar end links connect the sway bar, other wise know as an anti-roll bar, to either the axle or body of the Jeep, depending on where the sway bar is mounted on your Jeep. When you drive around a corner, the Jeep will naturally want to “roll” or pitch towards the outside of the turn.

Can you drive a Jeep with a broken sway bar?

If you suspect that a sway bar is broken, you can still drive the car, but you must use caution. The way this will affect your drive will depend on if the front or rear sway bar is broken. Front sway bar: If a front sway bar is broken, then you’ll experience significant differences in how the car handles (steers).

Do you need sway bars on a Jeep?

When your truck or Jeep with its steel bumpers is unbalanced due to sway, rolling over becomes a definite possibility, so a sturdy sway bar can give your truck the additional balance you need to drive those trails and obstacles.

Do I need an alignment after replacing sway bar links?

Removing the sway bar, and replacing it would not require an alignment, unless something that I mentioned above had to be moved to access the sway bar. Can Swaybar links cause vibration? It is also known as anti-roll bar, sway bar and anti-sway bar. The stabilizer bar should be checked for stiffness.

How do I know if my sway bar links are bad?

Warning signs of a broken or bad sway bar link include clunks and squeaks. Over-steering or excessive lean through turns are also symptoms of worn sway bar links, but they can also be signs of larger problems with your vehicle’s suspension system.

How long does it take to replace sway bar links?

How long does it take to fix a sway bar? Bushings should take maybe 30-40 minutes to change (in pairs) front and rear. Same thing for the links. Bushings should take maybe 30-40 minutes to change (in pairs) front and rear.

Do I need longer sway bar links with a lift kit?

If you are adding a lift kit to your Jeep you will need to install longer sway bar link pins. This is because the distance from the suspension to the sway bar will change. If you do not then the positioning of the sway bar will not be correct, or the links will not reach at all.

How much does it cost to fix a sway bar link?

The average cost for stabilizer bar link kit replacement is between $104 and $146. Labor costs are estimated between $44 and $56 while parts are priced between $60 and $90. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

What does a broken sway bar link feel like?

When Should I disconnect my sway bars?

There’s no reason at all why you’d want to disconnect the sway bars on your road car. And, for a four-wheel drive you only want to disconnect them when driving at low speeds off-road. Sway bars are designed to ensure your vehicle’s wheels don’t move too far up or down independently of the opposite wheel.