How do I add a static route in AIX?

Adding Static Routes in AIX Step 1: Go to the SMITTY menu for routes. Step 2: Select Type of route ‘net’ or ‘host’ (if default route then leave set to ‘net’). Step 3: Enter the destination address. Step 6: Enter the network interface for this route.

How do I add a static route?

Add a Static Route to the Windows Routing Table You can use the following syntax:

1. route ADD destination_network MASK subnet_mask gateway_ip metric_cost.
2. route add 172.16.121.0 mask 255.255.255.0 10.231.3.1.
3. route -p add 172.16.121.0 mask 255.255.255.0 10.231.3.1.
4. route delete destination_network.
5. route delete 172.16.121.0.

How do I add a static route in Unix?

Creating Persistent (Static) Routes

1. Use the route command with the –p option to persistently add a route: # route -p add default ip-address.
2. Display the currently active routes on a system by using the netstat command with the following options: # netstat -rn.

How do I find a route in AIX?

(netstat -nr will show if host or net route. H: host route, if no H is there it is a net route.) The route command distinguishes between routes to hosts and routes to networks by interpreting the network address of the destination address.

How do I create a route entry in AIX?

The second command is chdev -l inet0 that can be used to permanently add a route on an AIX system. When this command is used, the route will persist during reboots, as this command writes to information of the route in to the ODM of AIX. Let’s say you have a need to add a route on a system to network 10.0. 0.0.

What is PathPing command used for?

The PathPing command is a command-line network utility supplied in Windows 2000 and beyond that combines the functionality of ping with that of tracert. It is used to locate spots that have network latency and network loss.

How do I manually add a route?

Use the Route Add command to manually add the default route for the network interface that you added. Click Start, click Run, type cmd in the Open box, and then click OK. Type route print, and then press ENTER to view the routing table. Note the interface number of the network interface that you re-added.

How do you add a persistent route?

How to Add a Persistent Static Route by Specifying Destination and Gateway

1. View the current state of the routing table by using your regular user account. % netstat -rn.
2. Become an administrator.
3. (Optional) Flush the existing entries in the routing table. # route flush.
4. Add a persistent route.

How do I add a static route in Linux?

How to configure Static routing in Linux

1. To add static route using “route add” in command line: # route add -net 192.168.100.0 netmask 255.255.255.0 gw 192.168.10.1 dev eth0.
2. To add static route using “ip route” command: # ip route add 192.168.100.0/24 via 192.168.10.1 dev eth1.
3. Adding Persistent static route:

What is Route add command?

When used with the add command, the specified route is added to the registry and is used to initialize the IP routing table whenever the TCP/IP protocol is started. By default, added routes are not preserved when the TCP/IP protocol is started.

How assign IP address in AIX?

Sign in to the OS. In the SRA client view, type smit tcpip , and then press Enter to launch the TCP/IP page of the AIX System Management Interface Tool (SMIT). Select Minimum Configuration & Startup, and then press Enter. The Available Network Interfaces dialog displays.

What is the difference between ping and pathping command?

The main difference is that ping shows ICMP availability of the end point, which consist of the availability of hops in the middle and health of the endpoint. While pathping shows you health of the entire route. Show activity on this post. Ping shows the time it takes to get from you to the destination.