Can you face nail wood flooring?

Face nailing is the common practice used to nail the first few rows of boards in place because it is difficult to maneuver hardwood floor nail guns close to the wall. The proper way to face nail is to countersink the nails with a nail punch and fill the remaining hole with coordinating wood putty.

Which side of hardwood flooring do you nail?

Begin your nailing from the left side of the room and always do your nailing from left to right across the floor. Use a rubber mallet to tap the boards tightly into place. To nail your flooring, strike the plunger at the top of the nailer with the rubber mallet.

Do you nail through the tongue or groove?

For tongue-and-groove flooring, drive a nail at a 45-degree angle through the tongue, then conceal it by engaging the groove of the next board. Be sure to countersink the nail – drive it slightly below the surface of the wood – to prevent interference in the joint.

Can I use a regular nail gun to install hardwood floors?

If you’re handy with a finish nail gun, you can use it to install a hardwood floor. A finish nail gun, designed for trim work, shoots a near-headless nail that does not mar the surface look of the wood, which makes a finish nailer effective for installing hardwood floors as well.

How far apart do you nail hardwood flooring?

Per Flooring.org, the National Wood Flooring Association, states that for solid hardwood boards, nails or staples should be spaced between eight and ten inches apart, and for engineered wood boards, between four and eight inches. PowerNail has a handy Room Square Foot and Cleat Coverage Calculator.

What is a flooring nail?

The 8D or 8-penny size finishing nail is common for the job of flooring. Predrilling nail holes avoids split boards. Additionally, a nail-set tool lets you tap the nail head into the board without the risk of denting it with the hammer.

https://www.youtube.com/watch?v=nlvFUHX0O24