How do you calculate diversity factor for load calculation?

Diversity Factor = Sum of Individual Maximum Demands / Maximum Demand of the System. Diversity Factor = Installed load / Running load.

What is diversity factor PDF?

The diversity factor is the ratio between the actual power (P) and the maximum power (P) of. systems [7-8]. Moreover, the diversity factor shows the ratio of actual power and also affects to energy.

How do you calculate diversity?

How do I calculate Simpson’s diversity index?

1. Add the individual species populations to get N .
2. Determine N × (N – 1) .
3. Work out n × (n – 1) for each species, where n is the number of individuals in each species.
4. Sum all the values in step 3.
5. Divide the sum obtained in step 4 by the value obtained in step 2.

What is operating value of diversity factor?

A ratio of kWh generated to the product of plant capacity and the number of hours for which the plant is in operation.

What is diversity factor formula?

Diversity factor =Sum of Individual Max. Demand / Max. Demand = 6 Kw / 1.5 Kw =4.

How do you convert VA to kW?

Kilowatts are equal to the volt-amps times the power factor, divided by 1,000. For example, follow this example to convert 45 VA with a power factor of 80% to kilowatts.

What is diversified load?

The diversified load is the total expected power, or “load”, to be drawn during a peak period by a device or system of devices. The diversified load is the combination of each device’s full load capacity, utilization factor, diversity factor, demand factor, and the load factor.

How do you calculate the diversity factor of a feeder?

The diversity factor of a feeder would be the sum of the maximum demands of the individual consumers divided by the maximum demand of the feeder. In the same manner, it is possible to compute the diversity factor on a substation, a transmission line or a whole utility system. The residential load has the highest diversity factor.

How can load factor and diversity factor be improved?

Thus the suppliers should always try to improve the load factor as well as diversity factor by inducing the consumers to use the electrical energy during off peak hours and they may be charged at lower rates for such schemes. Loading…

How do you find the diversity factor of a system?

Diversity Factor = Sum of Individual Maximum Demands / Maximum Demand of the System. Diversity Factor = Installed load / Running load. The diversity factor is always >= 1. Diversity Factor is always >1 because sum of individual max. Demands >Max. Demand.

What is the difference between load and diversity value?

If we use diversity value in % than it should be multiply with Load and if we use in numerical value (>1) than it should be divided with Load. Diversity occurs in an operating system because all loads connected to the System are not operating simultaneously or are not simultaneously operating at their maximum rating.