How do you draw a via in HFSS?
in order to draw a via hole in HFSS you just need to draw a cylinder having the desired radius between two conductors on different layers (for example, between the ground plane and the signal layer of a microstrip). Via holes have a metallization on the inner surface of the cylinder.
How do I copy and paste in HFSS?
There really is not a benefit to not do this, so simply right click the HFSS design > copy > right click project > paste.
How do you CPW feed CST?
CPW feed and antenna are on the same plane. in CST, Go to Macros, then calculate then go to calculate analytical line impedance, select coplanar wave guide , enter material dielectric constant, height, U will get suitable width of CPW feed.
How do you stop HFSS simulation?
1) During the calculation, got to the “Progress” tab. It’s in the lower part of the screen, right underneath the graphics window. 2) Click the “Stop” buttons. 3) Wait for the calculation to stop.
How do I copy a design in HFSS?
Duplicating along a circular path is simple in HFSS. Select your object, and then use the “Edit”->”Duplicate”->”Around Axis” command. You may need to insert your own coordinate system (“Modeler”->”Coordinate System”->”Create”) in order to get the correctly positioned circle.
Is ANSYS and HFSS same?
Ansys HFSS (high-frequency structure simulator), is a commercial finite element method solver for electromagnetic (EM) structures from Ansys that offers multiple state-of-the-art solver technologies.
How do I assign a wave port in HFSS?
1. Select the object face to which you want to assign the port. 2. Click H FSS>Excitations>Assign>Wave Port.
How to draw a via hole in HFSS?
in order to draw a via hole in HFSS you just need to draw a cylinder having the desired radius between two conductors on different layers (for example, between the ground plane and the signal layer of a microstrip). Via holes have a metallization on the inner surface of the cylinder.
What can I do with HFSS?
• Create new designs in HFSS • Position and size parts using variables • Modify parts using Boolean operators like ‘Subtract’ • Navigate view in HFSS • Edit material properties and aesthetic properties • Assign wave ports • Calculate waveguide mode cutoff frequencies • Analyze HFSS models • Visualize and animate vector fields
How do I create a box in HFSS?
Setting Up HFSS STEP 2: BUILDING THE WAVEGUIDE To create a box, click the box icon highlighted below Building the Waveguide Use the mouse to design an arbitrary box, the dimensions don’t matter as they will be changed later
How do I use the HFSS view tools?
The HFSS view tools are not very helpful and can slow you down – don’t use them unless you have to Building the Waveguide Instead, the mouse shortcuts are much better solutions and will save you lots of time Scroll-Wheel Zoom In/Out Ctrl + Shift + Left-Click + Drag Pan View Middle-Click + Drag (Scroll-Click + Drag) Rotate View
