Why does my cordless phone say no power at base?

If your cordless phone shows “Searching”, “Base” or “Range Out” it means your phone has lost its link with the base. Try the following: If your cordless phone shows “Searching”, “Base” or “Range Out” it means your phone has lost its link with the base.

Why does my Panasonic phone says Base no power?

Try swapping the batteries between handsets. It is possible that a set of batteries is not fully charged. Please be advised that sometimes, you may need to reset your phone and then register the handsets again, to overcome signal issues or occasional glitches in the system.

How do you reset a Panasonic cordless phone?

How to Factory Reset Panasonic Phones

1. Press the Menu soft key (middle soft key) at the bottom of the screen.
2. Select System Settings from the menu.
3. Enter #136 on the keypad.
4. Select Yes when asked if you are sure you want to factory reset the phone. The phone will be reset successfully after startup.

Why won’t my phone connect to the base?

Next, make sure the phone is placed in the base for at least 5 minutes to reset its connection to the base, and then try placing a call after. If the problem still persists, there could be other signals messing up the connection. Check to see if there are any other cordless phones or ham radios around, and try turning them off.

Why can’t I make a call from the base?

Is the base to your phone on? That’ll make your phone think it is out of range. Next, make sure the phone is placed in the base for at least 5 minutes to reset its connection to the base, and then try placing a call after. If the problem still persists, there could be other signals messing up the connection.

What does it mean when my phone says “base station failed”?

This indicates a hardware failure in the base station (since the issue happens with all handsets). We most often see this type of damage to the base unit as the result of a power surge, either through the phone or power lines.

Why does my phone think it is out of range?

That’ll make your phone think it is out of range. Next, make sure the phone is placed in the base for at least 5 minutes to reset its connection to the base, and then try placing a call after. If the problem still persists, there could be other signals messing up the connection.