How do I reset my brother waste toner box?

To clear the message ‘Replace WT Box’ from the LCD display, power off the printer using the power switch on the right side of the printer. Wait 5 seconds and then power the printer back on. If the printer continues to display the message ‘Replace WT box’, the waste toner box is full and needs to be replaced.

Is Brother MFC-9340CDW inkjet or laser?

Brother MFC-9340CDW | Wireless All-In-One Color Laser Printer.

How do I connect my Brother MFC-9340CDW printer to my WIFI?

To set up your Brother machine on a wireless network: Connect the power cord to your Brother machine and then connect it to an AC power outlet (electrical socket). Turn your Brother machine on. (Settings) or Menu > All Settings > Network > WLAN > Setup Wizard.

How do I clear the message no waste toner?

Hold the green handle of the waste toner box and remove the waste toner box from the machine.

1. Check and clean the three metal contacts on the right hand side of the waste toner box.
2. Place the waste toner box in the machine.
3. Put the belt unit back in the machine.

How do you reset the drum on a Brother MFC 9340CDW?

Brother MFC-9340CDW – Reset Drum

1. Press “X” to clear the error message.
2. Press the tools button (picture of a spanner).
3. Press “All Settings”.
4. Press “Machine Info”.
5. Press “Parts Life”.
6. Press “#” until the touch screen message changes.
7. Press the colour of the drum that was replaced.
8. Press “Yes”.

How do I update the firmware on my Brother MFC?

Double-click the [P-touch Update Software] icon. Click the [Machine update] icon. Select the printer, ensure that [The machine is connected correctly.] is displayed, and then click [OK]. Select the Language, check the firmware to be updated, and then click [Transfer].

How do I get my Brother printer to connect to WiFi?

To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an electrical socket.
2. Press Menu button on the machine’s control panel.
3. Press the Up or Down arrow key to select Network and press OK.
4. Press the Up or Down arrow key to select WLAN and press OK.