What is Unganged mode?
unganged is 2×64 bit dual channel. Ganged mode is often the default BIOS setting and is considered to be better for single-threaded applications, while unganged can provide better performance in multi-threaded applications.
What is DCT Unganged mode?
Unganged mode enables two 64bit wide DRAM Controllers (DCT0 and DCT1). The recommended setting in most cases is the Unganged memory mode. Ganged mode may allow slightly higher Memory performance tuning and performs well in single-threaded benchmarks.
What is ganged and Unganged memory?
Long story short, ganged treats the memory subsystem as a single 128-bit bus, while unganged treats the memory subsystem as dual independent 64-bit buses.
What is Unganged mode ddr3?
Unganged has been the default for a while now and it simply means that the system does 2 discrete 64-bit memory operations at once, instead of a single 128-bit memory operation in ganged mode.
What is DRAM timing mode?
The DRAM Timing Mode option controls how the memory timing settings are configured. The Advance DRAM Configuration link activates with this option set to Link or Unlink.
What is memory hole remapping?
Memory Remapping allows for the installed but previously unusable memory to be utilised to its full potential. It renders the previously “invisible” memory, beyond the 4GB limitation, visible. Memory Remapping isn’t much use to 32-Bit systems; however, as the system limitation of 32-Bits ultimately corresponds to 4GB.
What is DRAM timing selectable?
DRAM Timing Selectable: You may see the letters SPD in this section. This stands for Serial Presence Detect and refers to the information programmed into your memory modules by the manufacturer, which tells the BIOS what latencies and voltage to use at any given clockspeed to ensure compatibility.
What is DRAM voltage?
We recommend being conservative when increasing DRAM voltage. Increasing voltage too much can damage your system. By default, DDR4 runs at 1.2v, while many memory module kits are rated to run at around 1.35v with XMP. Raise your voltage slowly until your system is stable; we recommend not going above 1.4v to be safe.
Should I Enable memory hole?
Since ISA cards are a thing of the past, it is highly recommended that you disable this feature. Even if you have an ISA card that you absolutely have to use, you may not actually need to enable this feature. Most ISA cards do not need exclusive access to this memory area.
Should I enable memory remap?
Memory remap should be enabled, if you’re using a 64-bit operating system that needs to be enabled so your system can make full use of the memory above 3GB.
Should I disable EIST?
It will be fine to disable the EIST. You will be fine. 2) When to enable it, and you play some games, if the CPU do not need full capability of the chip to handle those, so it will run lower frequency. That is the intel EIST ( Enhanced Intel SpeedStep® Technology ).
What should I set DRAM voltage to?
