What is 13-8 Mo?
13-8 Mo is an age-hardening stainless steel with high strength and hardness along with good levels of resistance to both general corrosion and stress-corrosion cracking. PH 13-8 Mo has been used for aircraft components, nuclear reactor components, valve parts, fittings, landing gear parts, and pins.
What type of material is 13-8?
hardening stainless steel
13-8 stainless is a martensitic precipitation hardening stainless steel that has excellent strength, high hardness, superior toughness and good corrosion resistance. Good transverse toughness properties are achieved by tight chemical composition control, low carbon content, and vacuum melting.
What is stainless steel grade 13?
Stainless steel-grade 13-8 is an age hardenable, precipitation stainless steel. This steel has good resistance to stress and general corrosion cracking, high transverse toughness and high strength obtained by a single low temperature heat treatment.
What is the fraction of 13 8?
1 5/8
Answer: 13/8 in a mixed fraction is 1 5/8.
Is 15 5ph a low alloy steel?
15-5 PH stainless steel is a martensitic precipitation-hardening stainless steel with approximately 15% Chromium and 5% Nickel. It has high strength, high hardness, and excellent corrosion resistance. Strength can be further increased by a single low temperature heat treatment.
What is the oxidation resistance of 13-8 Mo stainless steel?
PH 13-8 Mo stainless has displayed excellent resistance to oxidation up to approximately 1100°F. Long-term exposure to temperatures between about 600-900°F (288-482°C) can result in reduced toughness in precipitation hardenable stainless steels.
What is pH 13 8 Mo* stainless steel?
Description PH 13-8 Mo* stainless is a martensitic precipitation/age-hardening stainless steel capable of high strength and hardness along with good levels of resistance to both general corrosion and stress-corrosion cracking.
What is 13-8 Mo steel used for?
13-8 Mo is an age-hardening stainless steel with high strength and hardness along with good levels of resistance to both general corrosion and stress-corrosion cracking. PH 13-8 Mo has been used for aircraft components, nuclear reactor components, valve parts, fittings, landing gear parts, and pins.
Can phph 13-8 Mo stainless be overaged?
PH 13-8 Mo stainless in the H 1150 and H 1150M overaged conditions will not respond to further aging treatments. Therefore, if the alloy is obtained in either condition (for forging, optimum cold heading and machining) it must be solution treated at 1700°F, after these operations and before subsequent aging.
