How do I reset my Xerox WorkCentre 5335?

From the powered on state, hold down the “0” button for six seconds and then press the “Start” button while still holding the “0” button. The machine will prompt you for a password. Enter the default access number “6789” and press “Confirm.” The display will acknowledge that you are now in diagnostic mode.

How do you change the drum cartridge on a Xerox 5335?

Lift up on the Cover A release latch, and then open the cover. Lift up on the Drum Cartridge release latch and pull the cartridge out until the handle on top of the cartridge is visible. Grasp the handle and remove the cartridge from the machine. Place the cartridge on a few sheets of paper on a flat surface.

How do I print a configuration page on Xerox WorkCentre 5335?

Press the [Machine Status button] on the Control Panel. Select the [Machine Information] tab. Select [Information Pages], then [Configuration Report], and then [Print].

How do you reset a 3020 Phaser?

1. Hold the button PRINT SCREEN / WPS (above the power button) for about 10 seconds until the LED flashes once then leave. 2. Hold button again PRINT SCREEN / WPS for approximately 15 seconds until the LED stay green, then leave.

How do I reset my Xerox Phaser 3330 printer?

Reset the Printer to Factory Defaults

1. Log in to the control panel as a System Administrator.
2. Press the Home button.
3. Touch Device > Resets.
4. To reset the printer to factory defaults, touch Reset to Factory Defaults.
5. At the confirmation message, touch Reset.

What are the dimensions of The Workcentre 5325/5330/5335?

WorkCentre®5325/5330/5335 Detailed Specifications 3 Envelope Tray (Optional – replaces Tray 1) Capacity1Up to 60 envelopes Sizes#10 Commercial (9.25 x 4.125 in.), Monarch, DL, C5 Custom sizes: 3.9 x 5.8 in. to 6.4 x 9.5 in. (98 x 148 mm to 162 x 241 mm)

Which PostScript driver do I need for WorkCentre 5325/5330/5335?

Certain Printer Models (WorkCentre 5325/5330/5335 and WorkCentre 5325/5330/5335) may require the Optional PostScript kit for use of the PostScript driver. Installer Package supporting 10.5. Includes Xerox Printer Discovery and print queue creation for quick setup and use. Filename: 10.5.XeroxPrintDriver.2.94.3.dmg

What is the free Xerox printer driver?

Xerox Global Print Driver The free Xerox Global Print Driver manages Xerox and non-Xerox printers on your network with a single, easy-to-use interface. It dramatically simplifies enterprise printer management for IT managers, making it easy to add and update printers without changing drivers. Released: 01/05/2016

What is the Xerox V4 Print Pro application?

This application extends the feature set available on the Xerox V4 Print Drivers, exposing features such as accounting, secure printing, color adjustments, booklet creation, advanced finishing options, etc, and is required for full feature print functionality for the V4 Print Drivers. More details…