What is S700MC steel?

Ympress® S700MC is a hot-rolled, high-strength low-alloy steel. It combines high strength with outstanding formability and consistent quality. It also delivers exceptional weldability for fast and efficient processing.

What is weldox 700?

Weldox 700 is a general structural steel with a minimum yield strength of 650 – 700 MPa depending on thickness. Weldox 700 meets the requirements of EN 10025 for the corresponding grades and thicknesses. Typical applications are demanding load- bearing structures.

What is QT-100 steel used for?

A high strength material with a yield strength over 100 ksi, QT-100 (ASTM A514) is used in a multitude of applications, including: Heavy vehicle frames and chassis. Transport trailers. Construction and agricultural equipment.

What Strenx 700?

Strenx® 700 E/F is a structural steel with a minimum yield strength of 650-700 MPa depending on thickness. Strenx® 700 E/F meets the requirements of EN 10 025-6 for the S690 grade and thicknesses. Typical applications include demanding load-bearing structures.

What Strenx 100?

Strenx® 100 is a structural steel with a minimum yield strength of 100 ksi. Strenx® 100 meets the requirements of ASTM A514, Grade S, for thicknesses up to 2 1/2 inch. Available dimensions Strenx® 100 is supplied in plate thicknesses of 3/16 – 5 inches.

What is weldox steel?

Weldox/Strenx is the brand name of hot-rolled sheet steel from SSAB. This high-strength steel is low-alloy, cold-formed steel intended for use in the automotive and engineering industries.

What is S690 grade steel?

S690 QL is a high yield structural steel grade produced in compliance with EN 10025:6:2004. The material is heat treated using the quench and temper process and has good bending and welding properties.

What is AR400?

AR400, also known at Ford Steel as Wearalloy 400, is a high-carbon steel with a nominal hardness of 400 and a minimum hardness on the Brinell scale of 360 to 440. Abrasion resistant steel is created by quenching and tempering forged steel plates.

Which steel has highest yield strength?

S700MC, the highest yield steel for cold forming structural load-bearing components, with an improved titanium content of up to 0.22% and elevated yield strengths of up to 700 MPa.

What is Strenx® 700 steel?

Strenx® 700 products are structural steel with a minimum yield strength of 650-700 MPa depending on thickness. The chemical analysis, consisting of low levels of carbon has additional grain refiners such as niobium, titanium or vanadium that are precisely added to the chemistry.

How do I cut Strenx ® 700?

Mechanical cutting of Strenx ® 700 is best performed with guillotine shears. Consider carefully the settings of the cutting machine. The most important factors are clearance, cutting angle and blade hardness. The plate should be allowed to warm up thoroughly to around +20°C (68°F) before it is cut.

How many bars are in a vsqt25crmo4?

VSQT25CrMo4/500 Bar, forging VSQT25CrMo4/600 VSQT25CrMo4/700 VSQT25CrMo4/410 VSQT25CrMo4/900 Bar, tube VSQT50CrMo4/700