Who makes minivator stairlift?

Handicare Accessibility Limited
On 1 July 2010, Minivator and Freelift were merged into one single company: Handicare Accessibility Limited.

Where are handicare Stairlifts Manufactured?

Stockholm, Sweden
Handicare Group are a global company with sales in more than 20 countries and are a market leader in this field. The head office is in Stockholm, Sweden and manufacturing and assembly are located at six sites distributed across North America, Asia and Europe. We are approximately 1,150 employees.

How do you reset a handicare stairlift?

NOTE: If the display is showing anything but the diagnostic codes listed then it requires resetting. To do this, drive the stairlift away from the top or bottom stop. Turn off the power supply at the wall. Turn the main switch on the unit off for 10 seconds and then back on again.

Are companion and handicare the same company?

Companion Stairlifts, owned by Handicare, sell and install their stairlifts nationwide. Their dedicated team provides customer assistance every day of the year, 24 hours a day, and they offer emergency fitting throughout the UK.

How do you remove a stair lift?

How to remove a stairlift chair

1. Step one: Turn on the stairlift.
2. Step two: Move the chair to the end of the track.
3. Step three: Remove the limiter.
4. Step four: Remove the chair screws.
5. Step five: Release the chair lock.
6. Step six: Remove the chair.

How do you charge a stair lift battery?

These batteries are then recharged automatically once the stairlifts parked. This charge comes from the nearest plug socket / fuse spur and is feeded to a charging point or a charging strip which is located on the track. Once stairlift is parked it connects to the charging system.

Why is my handicare stairlift beeping?

My stair lift is constantly beeping This is a warning sound indicating that the stairlift’s power supply isn’t supplying enough power and will eventually stop working. Please check that your stairlift is parked in the correct position at the charging point (which is usually at the top or bottom of the stairs).

How do you move a handicare stairlift manually?

Fasten the seat belt securely, ensuring that it clicks into the holder. Put the key in the switch and turn it ninety degrees clockwise. Check that the chair is in the locked position. Move and hold the joystick in the desired direction of travel.

How do I stop my stairlift from beeping?

If you have had a powercut, you can temporarily stop the beeping noise by pressing the battery isolation button. The location of this will vary depending on the type of lift you have – this should be shown in your User Guide but if you’re still stuck please feel free to give us a call.

Is a Sterling lift the same as a minivator?

The Sterling lift may also be labeled as Minivator and are the same lift. Sterling Stair lift (Minivator) operator’s manual and diagnostic codes. The diagnostic display is located on the lower front cover under the on/off switch or to the side.

Are minivator stairlifts accredited?

Minivator has been accredited as conforming to the international standard of manufacturing, recognised by the award of ISO 9001. All Minivator stairlifts are built and tested to conform to the British Standard for stairlifts (BS5776):1996 as well as ISO 9386-2.

How do you operate a minivator 1000 stairlift?

Operating your Minivator 1000 Your Minivator stairlift is fitted with a key switch (Figure 2). The stairlift cannot be operated unless the key is inserted and turned to the on position. The key switch is provided to enable you to lock the stairlift to prevent it being used by others (for example children).

Where can I buy a minivator in England?

Minivator 82 First Avenue Pensnett Estate Kingswinford West Midlands DY6 7FJ England User support: 08700 118282 Fax: +44 (0)1384 408719 Email: [email protected] www.minivator.co.uk Minivator 1000 Series